China Hot Sell Single Worm Reduction Gearbox Wpa Series Worm Gearbox agnee worm gearbox

Product Description

WP worm gearbox is a new technology merchandise created by our factory on the foundation of bettering WJ series goods and combining sophisticated technologies at house and abroad. The look adopts superior square box construction. Its shell is produced of substantial good quality forged iron. Tiny volume, light fat, substantial radiation effectiveness, substantial output torque, easy operation, minimal sound. It satisfies all positions.
The merchandise are widely used in the generating equipments of all kinds of industries inside and outdoors China. They are the very best choices for presently modern amenities of mechanical minimizing drive handle to understand huge twisting distance, huge gear ratio, minor sound, substantial performance and stability.
1. Functions:
one) Substantial top quality aluminum alloy Motovario like equipment box, gentle bodyweight and non-rusting
two) Large output torque, stable transmission with reduced noise
3) Substantial warmth-radiating deficiency, elegant condition, resilient provider lifestyle and tiny measurement
4) Ideal for omni-bearing installation
two. Positive aspects:
one) Easy in managing and small in volume 
two) Large in radiating efficiency 
3) Sturdy in provider life 
four) Work long time in dreadful condition 
5) Completely sealed and non-rusting
3. Set up
1)The base-plate must be plane and stoutness and the base-plate must be screwed down and shock proof.
two)The connecting shaft of prime mover, reducer and operation device must be coaxial installation.
3)The diameter tolerance zone of input and output shaft is H6, the holes of fitness(such as couplings, belt-pulley, sprocket wheel and so on) must properly mate the shaft, which prevents bearing from breakage because of over-loose mate.
4)Drivers such as sprocket wheel and gear must be fitted close to bearings in order to reduce bending stress of hanging shaft.
five)While assembling motor of WPD reducer, it is necessary that proper amount of butter applies to the warm shaft input hole and keyway, avoiding assembling too tightly and rusting after using for a long time.
six)When ordering or using all kinds of WPD type, if the motor weight is binger than the common, supporting set is required.
four. Usage
Before using,please check carefully whether the reducer model, distance, ratio, input connecting method, 
output shaft structure, input and output shaft direction and revolving direction accord with required.

Complex data: 
Torque: 2N.m-3571N.m 
Input pace: 1000r/min, 1500r/min 
Output pace: .thirty-419r/min 
Energy: .04KW-15KW

WP reducer, divided into standard WPS collection, standard WPD series, standard WPA, WPO,WPDA,WPDO,WPDS,WPDS and so on. WP worm gear and worm reducer is created on the basis of WD reducer, the worm is manufactured of 45 # higher good quality steel soon after warmth remedy processing and manufacturing, worm gear with tin bronze forged, put on-resisting functionality is excellent, specifically on the bearing ability is far more apparent, worm gear and worm reducer is mostly utilized in plastics, metallurgy, beverage, mining, lifting transport, chemical reduction push construction and other mechanical equipment.
Advantages
one.Smooth transmission, vibration, impact and sound are modest, speed reduction ratio, vast versatility, can be utilized with a range of mechanical tools.
2.Can be a single level of transmission to receive a greater transmission ratio, compact construction, most versions of reducer has a good self-locking, braking demands of mechanical equipment can help save the braking device
three.worm tooth tooth meshing friction reduction is massive, so the transmission effectiveness is reduced than the equipment, simple to heat and higher temperature.
four.Greater requirements for lubrication and cooling.
five.Good mutual compatibility, worm equipment and worm are created according to nationwide specifications, bearings, oil seals and other regular elements.
six.The box human body kind contains simple sort (the box physique is vertical or horizontal sort with foot board) and universal sort (the box physique is cuboid, with set screw holes on multiple sides, with out foot board or yet another foot board, and so forth.).
7. There are 2 link modes of enter shaft: basic kind (solitary enter shaft and double input shaft) and motor flange.
eight. The position path of the output and enter axes is under and above the enter axes Output shaft up and down Input axis up and down.
9. Two or 3 reducer sets can be used to sort a multistage reducer to get a optimum transmission ratio.
 

Product: WP40,50,60,70,80,one hundred,a hundred and twenty,one hundred thirty five,one hundred fifty five,one hundred seventy five,200,250
Ratio: 1:ten,fifteen,twenty,25,30,40,fifty,60
Color: Inexperienced Or Buyer Request
Sounds: minimal noise (<50DB)
Gain: Successful and protected running

Materials:

Housing:Forged iron and Copper alloy
Worm Gear-Bronze 9-4#
Worm with carburizing and quenching, floor harness is 56-62HRC
Shaft-chromium steel-forty five#
Packing: Carton and Wood Scenario
Bearing: C&U Bearing
Seal:                       NAK SKF
Certification: ISO9001,CE,3C,OEM
Warranty: 12 months
Enter Electricity:    .06kw, .09kw, .12kw, .18kw, .25kw, .37kw, .55kw, .75kw, 1.1kw, 1.5kw, 2.2kw, 3kw, 4kw, 5.5kw, 7.5kw, 11kw, 15kw       
Usages: Industrial Machine: Foodstuff Things, Ceramics,CHEMICAL,Packing,Dyeing,
Woodworking,Glass.
IEC Flange: 56B5, 56B14, 63B5, 63B14, 71B5, 71B14, 80B5, 80B14, 90B5, 90B14, 100B5, 100B14, 112B5, 112B14, 132B5, 160B5
Lubricant: Artificial & Mineral

US $80
/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Machinery, Marine, Agricultural Machinery
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Layout: Expansion
Gear Shape: Worm
Step: Single-Step

###

Samples:
US$ 200/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Model: WP40,50,60,70,80,100,120,135,155,175,200,250
Ratio: 1:10,15,20,25,30,40,50,60
Color: Green Or Customer Request
Noise: low noise (<50DB)
Advantage: Efficient and safe operating

Material:

Housing:Cast iron and Copper alloy
Worm Gear-Bronze 9-4#
Worm with carburizing and quenching, surface harness is 56-62HRC
Shaft-chromium steel-45#
Packing: Carton and Wooden Case
Bearing: C&U Bearing
Seal:                       NAK SKF
Certificate: ISO9001,CE,3C,OEM
Warranty: 12 months
Input Power:    0.06kw, 0.09kw, 0.12kw, 0.18kw, 0.25kw, 0.37kw, 0.55kw, 0.75kw, 1.1kw, 1.5kw, 2.2kw, 3kw, 4kw, 5.5kw, 7.5kw, 11kw, 15kw       
Usages: Industrial Machine: Food Stuff, Ceramics,CHEMICAL,Packing,Dyeing,
Woodworking,Glass.
IEC Flange: 56B5, 56B14, 63B5, 63B14, 71B5, 71B14, 80B5, 80B14, 90B5, 90B14, 100B5, 100B14, 112B5, 112B14, 132B5, 160B5
Lubricant: Synthetic & Mineral
US $80
/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Machinery, Marine, Agricultural Machinery
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Layout: Expansion
Gear Shape: Worm
Step: Single-Step

###

Samples:
US$ 200/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Model: WP40,50,60,70,80,100,120,135,155,175,200,250
Ratio: 1:10,15,20,25,30,40,50,60
Color: Green Or Customer Request
Noise: low noise (<50DB)
Advantage: Efficient and safe operating

Material:

Housing:Cast iron and Copper alloy
Worm Gear-Bronze 9-4#
Worm with carburizing and quenching, surface harness is 56-62HRC
Shaft-chromium steel-45#
Packing: Carton and Wooden Case
Bearing: C&U Bearing
Seal:                       NAK SKF
Certificate: ISO9001,CE,3C,OEM
Warranty: 12 months
Input Power:    0.06kw, 0.09kw, 0.12kw, 0.18kw, 0.25kw, 0.37kw, 0.55kw, 0.75kw, 1.1kw, 1.5kw, 2.2kw, 3kw, 4kw, 5.5kw, 7.5kw, 11kw, 15kw       
Usages: Industrial Machine: Food Stuff, Ceramics,CHEMICAL,Packing,Dyeing,
Woodworking,Glass.
IEC Flange: 56B5, 56B14, 63B5, 63B14, 71B5, 71B14, 80B5, 80B14, 90B5, 90B14, 100B5, 100B14, 112B5, 112B14, 132B5, 160B5
Lubricant: Synthetic & Mineral

Is a worm gear reducer right for your application?

If you’re interested in gear reduction and wondering if a worm gear reducer is right for your application, you’ve come to the right place. This gear reducer is efficient and compact. In addition, it has small clearances and is easy to install. Let’s take a closer look.
worm_reducer

This is a reducer

Worm reducer is a type of reduction gear used in machinery. This gear reduces the output speed by changing the ratio of input to output. Gears come in a wide range of sizes and can be made from a variety of materials, including aluminum, cast iron, and stainless steel. Its efficiency depends on the ratio and size of the gears. It is usually used in low speed applications. But it can also be used as an auxiliary braking device for high-speed moving machinery.
When choosing a reduction gear, it’s important to look for models with multiple teeth. Ideally, it will have more teeth than the corresponding sprocket. This will reduce the noise produced by the gears. The maximum number of teeth of the worm gear should be greater than 40.
Worm gears produce less noise and vibration than conventional gears. Also, they are cheaper and smaller than other types of reduction gears. However, worm gears have some limitations that make them less efficient than other types. For example, they do not perform as efficiently as parallel or orthogonal axes, which are much better at transmitting power.
The main disadvantage of worm gears is the difficulty of lubrication. Worm gear reducers require more lubrication due to the helical motion of the gears. This means it is less efficient and more prone to wear than a standard gearbox. Helical motion has problems transmitting power and causes sliding friction, also known as sliding wear.
A worm reducer is a reduction gearbox used to decelerate a high-speed motor to a low-speed output. Worm gear reducers produce lower output speeds while maintaining high torque. Its gears are made of bronze or stainless steel and have a right-angle output. The gears are very small compared to other reducers, so they can be used in tight spaces and applications where space is limited.

pocket

Worm gear reducers are an excellent choice for applications requiring high torque and low speeds. These reducers are compact, durable and have a long service life. These gearboxes are also compatible with solid and hollow output shafts. This feature eliminates the need for chains or belts, reducing the number of moving parts. Plus, they’re easy to maintain, which means they’re an excellent choice for a variety of applications.
Worm gear reducers are also compact, versatile and easy to install. The worm gear itself is made from a single piece of alloy steel. It has a high helix angle and is case hardened and ground for durability. Its six AF hex sockets are designed for easy installation and a wide range of ratios. Worm gear reducers are also suitable for manual operation. They are easy to install, compact in design and compatible with a wide range of motors and drives.
Worm reducers are often used in industrial settings where a small amount of torque is required to move large objects. They are also useful when space is at a premium. They are compact and easy to install in tight spaces. Worm gears reduce the risk of tripping and are often made of durable materials, making them a popular choice.
Compared with planetary gearboxes, worm gear reducers have many advantages. They are quiet, produce less noise, and are more comfortable to use. They are also more energy efficient than their planetary counterparts. Furthermore, they can be combined with other gearboxes and trains to increase their output efficiency.
worm_reducer

It is high efficiency

When a worm reducer is used in a gear-motor, it is critical to note that it is extremely high in efficiency. This type of reducer is typically much hotter than a hypoid reducer, which reduces the service life of the gear. The increased thermal stress on the sliding gears results in premature seal wear and leakage. Furthermore, excessive heat causes lubrication to break down and can cause contamination. Helical gear reducers are significantly cooler and have a low-maintenance design. Consequently, they can reduce factory downtime and energy costs.
A servo-worm reducer is an excellent choice for applications requiring high performance, repeatability, and precision positioning. These gear reducers have been specifically designed for use with servo motor technology, which provides tight integration of the gear motor. Other advantages of a servo-worm reducer include reduced angular backlash and longer life.
Hypoid gearmotors offer increased efficiency and allow smaller motors to be used. A 1 HP worm reducer can produce the same amount of output as a 1/2 HP hypoid reducer. A Nissei Corporation study compared the two types of reducers, comparing power, torque, and efficiency. As a result, a 1/2 HP hypoid gearmotor is much cheaper to operate than a 1 HP worm reducer.
The efficiency of a worm gear reducer depends on many factors, including the mesh of the gears and losses in the bearings and oil seal lips. The speed and load of the reducer also have an impact on its efficiency. As a result, worm gear reducers should be used with the right type of lubricant.
In a worm gear reducer, a non-intersecting shaft rotates against a gear, while the output worm gear rotates in a perpendicular direction. This arrangement produces high efficiency while reducing the noise and vibration of the gear motor. This gear reducer is also quiet and has a low friction coefficient.

It has a low clearance

Worm Reducers are typically designed with a low clearance, meaning that the worm is not allowed to touch the wheels in the gear arrangement. The lubricant used depends on the size of the gearing, and it is usually ISO 680 or ISO 460. Higher viscosities require special equipment.
Worm gears are popular in machines that need to stop quickly, such as lifts and elevators. The gears and worm are made of a soft material, minimizing backlash and failure rates. They are also popular in heavy-duty machines, such as rock crushers. But while this is an important aspect of their design, there are other factors to consider when choosing a worm gear.
Worm gears have multiple teeth, which allows for greater surface area contact and a better distribution of load. This feature allows for high transmission ratios without sacrificing power. Worm gears can be paired with other gearboxes to increase the overall efficiency of the system.
Worm gears are often used in heavy machinery, including trucks barreling down a deserted highway. They can also be found in packaging machinery, conveyors, and other small machinery. Their unique shape makes them ideal for tight spaces. But they also tend to wear and tear much faster than conventional gears.
worm_reducer

It has a high torque to weight ratio

The worm gear reducer is a versatile gear train that provides a high torque-to-weight ratio. These reducers are typically used in applications that require high torque and high gear ratios, such as machine tools. They also have a very compact design, enabling very high gear ratios at low speeds.
Worm gear reducers are very quiet, mainly because the input and output shafts are perpendicular to each other. Their low noise level is an advantage compared to planetary gearboxes. Compared with planetary reducers, worm gear reducers are also relatively cheap.
The worm gear consists of two parts: the helical butt-jointed worm gear and the worm. The screw-butted worm gear is connected to the shaft by a helical thread. The worm gear is a variation of the six-simple machine. The worm is located in the worm wheel, which forces the worm to rotate. It also changes the plane of motion. Worm gears are usually made of steel or brass.
Worm gear reducers are one of the most popular types of reducers. It provides high torque and high speed ratio in a compact package. These reducers are used in many power transmission systems, including elevators, safety gates, conveyor belts, and medical testing equipment.
Worm reducers come in a variety of shapes and sizes, including parallel shaft reducers and planetary worm reducers. They have a high torque-to-weight ratio and are easy to maintain. They are also lightweight and relatively easy to install. This makes them an excellent choice for many applications.
Worms can be assembled using stepped shafts, set screws or dowel pins. However, the worm is subject to a lot of thrust and must be held firmly. This could lead to a rebound. Also, the bearings may come loose and the worm may move. To avoid backlash, make sure the worm gear shaft passes through the midpoint of the worm face width.

China Hot Sell Single Worm Reduction Gearbox Wpa Series Worm Gearbox     agnee worm gearboxChina Hot Sell Single Worm Reduction Gearbox Wpa Series Worm Gearbox     agnee worm gearbox
editor by czh 2022-11-28